INSULATED GLASS UNITS
DOUBLE GLAZED UNITS
TRIPLE GLAZED UNITS
TOGGLE / STEPPED UNITS
SOLAR CONTROL GLASS
CERAMIC FRITTED GLASS
PRINTED / DECORATIVE
MESH / FABRIC / DICHROIC
MARBLE / STONE / WOOD
FLAT / CURVED
Permission to use this image given by the photographer Cassini2008 (Vincent Phillips).
Permission to use this image given by the photographer Cassini2008 (Vincent Phillips).
The Printed Film Co Ltd specialise in supplying flat and curved laminated safety glass, IGU's, DGU's and TGU's c/w soft coat Low E and various solar coatings i.e. Guardian, Saint Gobain, AGC, Pilkington etc... We also offer digital or screen printed ceramic fritted glass, if required. As such, we are the most competitive supplier in the UK, especially where the following are required:
Toughened, heat soaked or heat strengthened laminated glass
Toggle/structural glazing/stepped units
Bolted, beams, fire-glass.
As well as our clear laminated safety glass, we also offer architectural decorative laminated glass encapsulating bespoke printed PVB or PET interlayer’s, direct printed glass, and other decorative elements such as metal meshes, fabrics, Vanceva colours, marble/stone, dichroic etc… These can also be incorporated into units.
We also offer stunning bespoke graphics, manifestation, wayfinding and branding, digitally printed, including white ink, at a very high definition / resolution, onto our optically clear PET window safety film, designed to enhance the environment within; commercial, residential, educational, architectural, healthcare, automotive & transport, hotel & leisure, retail, public spaces etc…. internally & externally, with bespoke manifestation, privacy, safety, corporate branding, wayfinding, and environmental graphics.
Our products have gone into jobs for Clients such as; KPMG, JP Morgan, Barclays, HSBC, GlaxoSmithKline, The NHS, Shell, BT, Land Securities, The BBC, Network Rail, National Grid, Diageo, Coca-Cola, London Eye, Audi, Jaguar, London Underground, TFL, Crossrail, Heathrow Airport, eBay, Intu, Samsung, 3 Store, Calvin Klein, Cartier, BVLGARI, Christian Dior, Estee Lauder, Harrods etc…
We supply both flat and curved units c/w low e and various solar coatings including Guardian, SGG, Pilkington, AGC etc... Toughened, heat soaked or heat strengthened, with standard clear or decorative laminated inners and / or outers, argon filled cavity and various spacer options. We can also incorporate digital or screen printed ceramic fritting, if required. We also specialise in oversize glass/units, toggle/structural glazing/stepped units etc...
DECORATIVE LAMINATED GLASS
Laminated safety glass encapsulating either bespoke direct printed PVB or PET film interlayer’s, direct printed glass, or other decorative elements such as:
Vanceva colour PVB’s
Real stone / marble or any printed marble or stone effect that looks just like the real thing!
Real wood veneers or any printed wood veneer effect that looks just like the real thing, but can be much wider and with significantly longer warranty!
Natural organic elements
Switchable / smart film and unique reverse switchable smart film (off is clear / on is frosted privacy) so saving energy and also extends the lifetime of the film!
PVB (Eastman or Kuraray)
Glass: flat or curved (low iron, extra clear, float, anti-reflective etc...) including notches, cut-outs, drill holes, various edge finish/polish options. Toughened, heat soaked, or heat strengthened.
We can also structurally bond laminated glass panels to framework, if required.
PRINTED WINDOW FILM
Digitally printed optically clear PET window safety film, perfect for creating sensational bespoke manifestation, privacy, branding & graphics on glazing & glass partitions, whilst also complying with DDA regulations. Our printed window film can be applied on either the internal or external face of glass to give stunning images / designs including effects such as seamless fades / graduations, very intricate designs, opaque, translucent or transparent graphics viewed the same from both sides, bespoke frost / white / colour densities to any Ral, Pantone, NCS etc… All of which are not achievable in traditional vinyl.
The film is as clear as the glass it is applied to, making the images seem as though they are printed directly on the glass! The inks cure onto the film and are therefore scratch resistant. The film also makes the glass shatterproof to British and European Standards; BS 6206 and EN 12600. The adhesive layer contains UV inhibitors, which block out 99% of the incoming UV rays from the sun, stopping fixtures, fittings, furnishings, stock etc…. from fading.
Bespoke printed one piece wallpapers/wall graphics (up to 5m high x 50m long), in a one piece continuous graphic, with no overlaps or joins. Perfect for commercial, educational, healthcare, hotel & leisure, retail, public spaces etc…. For corporate branding, wayfinding, and environmental graphics.
The Printed Film Co Ltd have just supplied numerous insulated glass units c/w solar control coating, stepped units c/w solar control coating and opaque black frit border and other laminated safety glass panels, all to New City Hall in London.
TPFC have just been awarded a £300K contract to supply and fit aluminium window, door and curtain wall stick work, along with insulated glass units encompassing a ceramic printed toughened baked design on each of the 160 units/350m2. Further details to follow, once completed.
We are delighted to announce that we have yet again retained our ISO 9001:2015 UKAS accreditation, in line with our strategy to continue to improve our quality and service.
The Printed Film Co Ltd have recently completed our biggest contract to date, supplying route wide wayfinding laminated glass signage for Crossrail. A significant seven figure contract for us, involving thousands of large curved and flat laminated safety glass panels, we have been responsible for supplying most of the wayfinding signage within the stations for the Crossrail ‘Elizabeth Line’ project.
FAQ / T's & C's
Can you print different densities of frost?
Yes we can print anything from a 1% to a 200% density of frost. This is also the case for white and any other Ral or Pantone. We can also print seamless / smooth fades, graduations, frits etc…
Why up to 3 layers?
As we can print a single strike, double strike or multilayer, we can create transparent, translucent or opaque images / designs, viewable from one or both sides of the glass, depending on your requirements.
Why do you print on an optically clear PET window safety film?
As the film is completely optically clear it makes the design / image seem as though it has been printed directly on the glass! The inks cure onto the film and are therefore scratch resistant. The film also makes the glass shatterproof to British and European Standards; BS 6206 and EN 12600. The film has UV inhibitors in the adhesive layer which block out 99% of UV rays so stopping any internal fixtures, fittings, furnishings, stock etc… from fading. We can print on various grades of film from 2mil / 50 micron up to the heavier gauge bomb blast films. We generally print onto 4mil / 100 micron film as this covers most requirements within one installation.
What artwork formats do we work from?
Ideally a .pdf, .ai (Adobe Illustrator) or .eps (Vector file) at 150dpi full size or 300dpi half size. We also work from tifs, jpegs etc… We also create artwork from scratch, developing your ideas, to meet your requirements.
What is the print quality like?
As we use the latest generation roll to roll / flat bed digital printers & inks, our quality cannot be beaten, and in most cases cannot even be matched!
How much experience do we have in this field?
Our Technical Director has been in the printing industry for over 20 years, so whatever your requirement, we have got it covered.
We pride ourselves on being at the forefront of the latest printing technologies, ink developments & printable substrates, which is why we have & will continue to provide solutions that others have not been able to come up with.
What standards do you comply to?
Toughened glass to BS EN 12150.
Pendulum test – Impact test BS EN 12600.
Laminated glass to BS EN 14449.
Heat soaked glass to BS EN 14179.
Heat strengthened glass to BS EN 1863.
We are fully insured for; Professional Indemnity, Employer’s Liability, Public Liability and Products Liability.
We are also ISO 9001:2015 UKAS accredited.
We can also structurally bond glass / laminated glass / units to framework, if required.
Terms & Conditions of Sale:
Unless stated to the contrary in writing by The Printed Film Co Ltd, orders are only accepted on the following terms and conditions. These terms and conditions apply in preference to and supersede any written or oral terms and conditions of the Customer unless otherwise agreed in writing. If any part of these terms is found to be unlawful, it shall not affect the validity of the remainder
The laws of England shall govern the contract and the parties hereby submit to the jurisdiction of the English courts.
The Printed Film Co Ltd will not be responsible for loss arising from delay or any failure to deliver arising from an Act of God, civil disturbance, war, industrial action or dispute, fire, flood, sabotage, restrictions, controls or prohibition of the Government or any other acknowledged authority, or any other causes beyond our control.
The Printed Film Co Ltd shall make all reasonable efforts to fullfil quoted delivery and installation dates that are intentions only and not binding on The Printed Film Co Ltd. Failure to meet these dates or in the case of delivery by installment, any one installment, shall not constitute breach of contract and the Customer shall not be entitled to rescind or abjure the contract or any other related contract, in whole or part, or claim damage for such failure unless time is of the essence as evidenced in writing, stated and signed by both parties.
If sufficient information to complete the order is not supplied within 14 days of instruction, The Printed Film Co Ltd reserves the right to invoice the value of materials manufactured offsite. If the Customer fails to give delivery instructions within 5 days of being notified that the goods are ready for collection or delivery, then the whole of the invoice will become payable. Such goods will be marked the property of the Customer, subject to completion of payment terms and we shall also be entitled to charge storage from that date.
Where The Printed Film Co Ltd or its sub contractors attends site to perform installation at the agreed time in accordance with client instructions, the site should be properly ready and all substrates prepared in readiness before such attendance, a copy of these requirements is available on request. In addition all instructions with regard to fixing locations and fixing methods must be issued before attending site. Failure to meet these provisions may result in delay or aborted visits which be charged at day work rates with a minimum charge for a one man visit of £300 plus disbursements. It is likely that delays in installation in this circumstance will delay the project as a whole and The Printed Film Co Ltd reserves the right to invoice for goods off site or partial completion.
Where requests for information are not responded within the stipulated timescale then delays may ensue or The Printed Film Co Ltd may at its discretion make an interpretation to ‘best guess’ to ensure progress in the works. Changes made after requests for information dates have lapsed or after interpretations have been action may attract abortive costs.
The Customer shall be deemed to have accepted the goods and that they are in accordance with the contract unless, within 14 days of receipt of goods and prior to their use, resale or installation, whichever is the latter, the Customer advises The Printed Film Co Ltd in writing specifying any alleged defects. Shipment’s to a third party is at the Customer’s own risk and instruction.
The Customer is requested to sign the acceptance of quality sheet following installation (if organised by The Printed Film Co Ltd).
Loss or damage in transit
The Printed Film Co Ltd will only accept a claim by the Buyer in respect of loss or damage in transit if:
• Loss or non-delivery: The Buyer advises The Printed Film Co Ltd in writing within 3 days of receipt of the relevant invoice.
• Damage in transit: The Buyer advises The Printed Film Co Ltd in writing within 3 days of delivery and provides photographic evidence at the time of the claim.
• Goods transported by an independent carrier: The Customer must comply with the freight carrier’s conditions of carriage for notifying claims for loss or damage in transit.
• Inspection of Goods: The Printed Film Co Ltd is given all reasonable opportunity to inspect the damaged goods, photographic evidence is to be provided in the first instance to allow The Printed Film Co Ltd to recoup losses against insurances or the carrier where appropriate.
• Exceptions: The Printed Film Co Ltd will not accept any claims where deliveries are made to a third party or a site address or where goods are quoted ex-works.
The Printed Film Co Ltd reserve the right to make good any damage or defects due to faulty materials or workmanship notified to us, by repair or replacement at our discretion.
The Printed Film Co Ltd will not accept claims made as a direct result of willful damage, negligence, incorrect storage or fixing nor by fair wear and tear.
The Printed Film Co Ltd accept no responsibility whatsoever for the loss of any goods once proven delivered to site.
Claims relating to quality must be accompanied with a completed claims form and sufficient photography to substantiate the claim. In the event that a defect is apparent, The Printed Film Co Ltd may send a technical representative to inspect the goods at its discretion. Goods may be required to be returned for rectification where standard stock product is not available or appropriate. Replacement goods will be invoiced in full and a credited when goods are returned and/or confirmed as defective by The Printed Film Co Ltd.
The process of installing PET window film can trap moisture between the film and glass, as the PET film is porous trapped moisture will evaporate during the adhesive curing cycle. The Printed Film Co Ltd suggest that before a claim is made following installation that the evaporation process is allowed to evolve which would normally be 30 days.
Reservation of Title
Notwithstanding that the risk in the goods has passed to the Customer, the title in the goods remains with The Printed Film Co Ltd until full payment has been received from the Customer in respect of the goods.
If the Buyer shall default in payment of the goods The Printed Film Co Ltd shall be entitled to repossess any goods which remain the property of The Printed Film Co Ltd and the Customer for that purpose shall afford the The Printed Film Co Ltd access to enter any premises to recover the goods. Recovery of the goods will not release the Customer from their financial obligations.
The Printed Film Co Ltd provide a warranty condition document for each product type. This information is available by request by contacting the The Printed Film Co Ltd, who strongly advise that the Customer requests, and once received, reads the appropriate warranty conditions. Where the product supplied by The Printed Film Co Ltd is a printed substrate, the type of ink used and the end user application also determines the warranty period offered. The printed inks colour fastness and colour variation may also determine warranty conditions. Please note that the colours within any printed samples may vary when in full production mode.
Limitations and Liabilities
The Printed Film Co Ltd takes no responsibility for the quality of artwork supplied by a Customer or their agent. The Printed Film Co Ltd will comment on the quality of supplied artwork and if not to a standard which will produce acceptable images will quote at the rate of £60.00 per hour to rework the supplied artwork to an acceptable standard.
The Printed Film Co Ltd accepts no responsibility for safe keeping of products, equipment or materials which have been delivered to the Customer, agent or nominated site. Any cost associated with any loss of products, materials or equipment once delivered to a Customer, agent or nominated site caused by whatever reason is the responsibility of the Customer or its agent.
The Printed Film Co Ltd will make all reasonable effort to ensure that the goods are manufactured and/or supplied to specification but it is the responsibility of the Customer to ensure that goods are fit and suitable for the purpose they are required.
All conditions and warranties expressed or implied as to the condition or fitness for any purpose of the goods are expressly excluded and The Printed Film Co Ltd shall be under no liability for any direct or consequent loss howsoever arising that may be suffered by the Customer by reason of any default or failure to perform on the part of the goods.
If any goods prove to be defective and where The Printed Film Co Ltd has accepted any liability, the liability of The Printed Film Co Ltd shall for all purposes, be limited to the cost of replacement of the goods which The Printed Film Co Ltd originally supplied only.
It is the Customer’s responsibility for the infringement of any patents or copyright or registered design or trademark of any third party in The Printed Film Co Ltd execution of the Customer’s instructions and it is the Customer’s responsibility to obtain the necessary licences or permissions and to indemnify The Printed Film Co Ltd against all claims arising out of such an infringement.
Orders for the installation and erection of any The Printed Film Co Ltd product are undertaken on the understanding that the Customer has complied with the requirements of the local planning and other interested official parties in obtaining all relevant planning permission and permits. Any charges levied by authorities before during and after installation and erection are to be borne by the Customer.
Where any The Printed Film Co Ltd product is erected on a partition, window, structure or any substrate it is the Customers’ responsibility to ensure that the partition, window, structure or substrate is of adequate strength and in good condition to bear the additional loads imposed by the installation of the The Printed Film Co Ltd product.
Likewise where any The Printed Film Co Ltd product is to be fitted or erected in the ground/floor it is the responsibility of the Customer to ensure that no services such as gas, water, electricity, telephones, cables or pipe work are likely to be interfered with, damaged or obstructed as is any inference damage or obstruction caused thereto by our staff or sub-contractors in the event of the positions of such services not being advised to us or incorrectly advised to us.
Unless otherwise expressly agreed in writing The Printed Film Co Ltd reserves the right to alter prices at any time without notice to the Customer. Prices quoted are exclusive of VAT or duties where applicable. Prices do not include the cost of freight or carriage which will be additionally charged to the Customer. Shipments may be charged with insurance, unless instructed contrary, and then will ship at Customer’s risk. Quotations are subject to withdrawal at any time before receipt of an order. All quotations have a 30 day validity will be deemed withdrawn if not accepted within this time, unless stated otherwise on the quotation.
Unless other credit terms have been agreed in writing, payment is to be made in full at the time of the Customer placing the order.
If standard credit terms are in place the Customer must pay for the goods within 30 days of the date of The Printed Film Co Ltd invoice.
The Printed Film Co Ltd reserves the right to charge monthly interest at a rate of 5% per annum above Bank of England base rate from the date of which the invoice is overdue until actual payment is received.
No order that is accepted by The Printed Film Co Ltd may be cancelled by the Customer except with agreement in writing by the The Printed Film Co Ltd. A payment may be chargeable and where goods are agreed to be taken back into stock a restocking fee of 20% is chargeable.
Where it is stated in the quotation that there is a discount for an on-time payment within so many days, the total payment must clear in the account The Printed Film Co Ltd within the stated number of calendar days for the Customer to qualify for the discount. Late payments will render the sum stated as owing and may be pursued as a debt if this amount is not paid within another 14 days.
Where The Printed Film Co Ltd are supplying a laminated glass product, the following Terms and Conditions of Sale apply;
Conditions of sale
These terms and conditions shall govern every contract for the sale of goods made by The Printed Film Co Ltd. These terms and conditions supersede the buyer‟s terms and conditions. No variations to these conditions shall be binding unless agreed, in writing, by a director of The Printed Film Co Ltd.
If credit account has been arranged then the final date for payment is 30 days from the invoice date. Otherwise all payments are to be made prior to the delivery of the goods on a pro-forma basis. All goods remain the property of The Printed Film Co Ltd until they are paid for in full.
Fixed price & Acceptance
The value of our estimate will remain fixed for the costs of labour and materials supplied prior to the date stated in the body of our estimate document. Labour and materials supplied after the stated date will be charged at an additional cost. The Printed Film Co Ltd reserves the right to withdraw or revise a tender at any time prior to written acceptance of the buyer’s order. Where the estimate stipulates that trial production is necessary prior to manufacture, no order or agreement shall be binding on The Printed Film Co Ltd until The Printed Film Co Ltd confirms, in writing, that the trial production has been successfully completed and that full production may proceed. Should the trial production fail for whatever reason The Printed Film Co Ltd will not be liable or responsible for reimbursing or indemnifying the buyer against any losses they may incur.
This estimate is subject to VAT. We request you to note that our price would therefore be subject to any net cost increases due to this tax.
The value of the works either a lump sum or measured using a schedule of rates. Variations are to be measured and charged pro-rata to the order sum or the stated schedule of rates.
Any work undertaken outside of the fabrication programme for the works stated in our estimate will be charged using the stated schedule of rates with a minimum charge of £100.00 plus VAT
Unless stated in the body of the estimate the client is responsible, at all times, for the delivery and collection of all materials. Unless stated in the body of the estimate no allowance has been made for protection or stillaging of the finished glass. If stillages are required, these can be provided at additional cost. If delivery is required, this can be provided at additional cost.
If own glass (Free Issue Glass) is delivered to The Printed Film Co Ltd the client is responsible for the glass, at all times, and will have to issue any replacements free of charge, if required.
Where goods are manufactured to the client’s templates the templates must be constructed from rigid materials and each must fully be labelled as to what glass processing is required. Responsibility of the accuracy of the templates remains with the client.
A credit account may be opened, subject to approval by our Directors. If credit facility is not available we reserve the right to request payment in advance for the works.
Risk & Title
The legal title of any good and or services supplied by The Printed Film Co Ltd shall remain the property of The Printed Film Co Ltd until payment has been received in full in accordance with these terms and conditions. Failing receipt of payment The Printed Film Co Ltd remain the legal owner of the goods supplied. Goods must be inspected by a buyer’s representative on delivery/collection. If any goods are damaged or the order is not complete the buyer must inform The Printed Film Co Ltd in writing within three days of delivery date. The client must give The Printed Film Co Ltd (and any carrier) a fair chance to inspect the damaged goods. If the client fails to notify The Printed Film Co Ltd in accordance with these requirements, the buyer will not be entitled to reject the goods and will be deemed to have accepted the goods in accordance with the contract.
Our estimate is open for acceptance for a period of 30 days from its submission date. If not accepted by a written order within this timescale the prices are no longer valid and are subject to re-negotiation and written confirmation.
No order accepted by The Printed Film Co Ltd may be cancelled by the client, unless agreed in writing by The Printed Film Co Ltd. Cancellation may be agreed on the condition that the client shall indemnify, The Printed Film Co Ltd in full, against all losses, costs, damages, charges and expenses incurred by as a result of the cancellation.
The client cannot assign or transfer obligations or rights imposed by these terms and conditions without prior written agreement from The Printed Film Co Ltd. The Printed Film Co Ltd reserves the right to assign or subcontract any of the works detailed in the body of our estimate.
The Client will be responsible for ensuring that any specified materials are fit for purpose. The Printed Film Co Ltd accepts no responsibility, representation, warranty or any liability to ensure the suitability of the goods for any particular application. The client shall rely on his own professional advisers to provide advice on any necessary design, specification, structural and performance information.
The Printed Film Co Ltd shall not be liable to the client or deemed to be in breach of any contract with the client by reason of any delay in performing any of the obligations of these terms and conditions if said delay is due to force majeure or any other cause beyond the reasonable control of The Printed Film Co Ltd. Neither party shall be liable for failure to perform its obligations under the Contract if such failure results from circumstances beyond the party’s reasonable control.
The Printed Film Co Ltd may terminate, without liability, the contract by providing written notice to the client if:-
1. Either the client makes any voluntary arrangement with its creditors, becomes subject to an administration order, becomes bankrupt, goes into receivership, ceases or threatens to cease trading.
2. Payment has not been received from the client in respect of all money due and owing on all contracts within the specified terms.
3. The client is in breach of the terms and conditions detailed within this document.
4. The client is in breach of any other contract with The Printed Film Co Ltd.
5. Either party shall have the right to terminate the Contract if the other party is in breach of Contract and does not rectify such breach within 14 days of notification in writing.
6. Any formal insolvency of either party may constitute an event of default leading to the right to termination. The Customer must pay for all invoices where the product or service has been provided as per the specific purchase order (with no right of set-off), notwithstanding any other purchase orders not yet fulfilled.
This contract is divisible, whereupon a separate purchase order is provided. The work performed for each purchase order during the contract shall be invoiced separately. Each invoice for the work performed for any purchase order shall be payable by the Customer in full, in accordance with their terms of payment provided for herein, without reference to and notwithstanding any defect or default in the work performed or to be performed for in any other period or for any purchase order.
As with all processed toughened and /or laminated glass and/ or double glazed units, unless otherwise specified, all glass supplied to a Customer, with working drawings, and is subject to standard glass processing tolerances. Any glass requiring CNC work, machining, shaping, laminating or DGU processing must be clearly documented by the Customer as to which way round coated glass is to be assembled or laminated and the exact location of holes and polishing details. Bubbles in laminated glass will be deemed to be acceptable provided that they do not exceed 4mm in diameter and are spaced more than 250mm in any direction. “Seeds” (impurities in the glass when manufactured) will be deemed acceptable providing they are no larger than 3mm in diameter or shape.
The Printed Film Co Ltd warrants that the goods will correspond to the specification agreed in the body of the estimate and will be free from defects in materials or workmanship. The warranty period of the laminated glass product varies dependent on the interlayers used, where the glass is to be / has been installed, as well as the fitting method / fixings used. Therefore prior to the Buyer / Customer placing an order, they should request warranty information from the Printed Film Co Ltd in writing. The liability of The Printed Film Co Ltd is limited to the replacement of any defective goods, originally supplied by The Printed Film Co Ltd only, to the same location as the original order and excludes any costs incurred in transporting the replacement goods to any other location and excludes any costs incurred whatsoever in removing and / or replacing any goods onsite including plant, machinery, construction and labour. Once the laminated glass has been collected by the Customer or delivered by The Printed Film Co Ltd, it is the responsibility of the Customer to store the glass on appropriate frames / stillages and in suitable, safe, dry conditions, unless being installed outdoors or where the glass can be exposed to water, weather or the elements, which must have been confirmed by the Customer, in writing, to The Printed Film Co Ltd prior to placing the order. Failure to do so will invalidate any warranty offered by The Printed Film Co Ltd. This warranty is provided in lieu of any other warranties, obligations or conditions expressed or implied whether by statute or otherwise and is subject to the following:-
1. Claims must be notified by the Customer, in writing, within 48 hours of delivery. During the visual inspection of our laminated glass, please follow the GGF guidelines (a copy of which is available on request). Any laminated glass supplied by The Printed Film Co Ltd, must be inspected by the Customer and deemed acceptable prior to that glass being structurally bonded to any surface, any fittings / fixings / trims etc… being installed on / to the glass and also must be inspected by the Customer and deemed acceptable prior to that glass being installed onsite. Any glass snagged / rejected once structurally bonded to any surface or installed onsite, will be fully chargeable, if resupplied by The Printed Film Co Ltd.
2. Any defective goods must be retained by the client for inspection by The Printed Film Co Ltd.
3. The Printed Film Co Ltd will not be liable for any defect in the goods arising from any error in any drawing, design or specification provided by the client.
4. The Printed Film Co Ltd will not be liable for any defect or failure for any damage caused by fair wear and tear, misuse, unauthorised alterations, additional fixtures / fixing details / methods previously undisclosed by the Buyer / Customer prior to placing the order with The Printed Film Co Ltd, willful damage or negligence by the client or any third party. Delamination of laminated glass shall be limited to 15mm in the perimeter edge zone over the warranty life of the product.
5. The Printed Film Co Ltd will be under no liability if full payment of the goods supplied has not been made by the payment due date.
6. The warranty does not extend to parts, materials or equipment not supplied by The Printed Film Co Ltd.
7. The Printed Film Co Ltd shall not be liable for any consequential loss, damage or other claims for consequential compensation.
8. Goods sold by The Printed Film Co Ltd are subject to manufacturing qualities and tolerances. A copy of these can be supplied upon request.
9. The Printed Film Co Ltd will not be liable for; cost or provision of plant or labour for the purpose of replacement work, any structural or temporary works required, materials taken outside of the United Kingdom, optical phenomena or blemishes.
10. Where the product supplied by The Printed Film Co Ltd contains a printed substrate / interlayer, the type of ink used and the end user application also determines the warranty period offered. The printed inks colour fastness and colour variation may also determine warranty conditions. Please note that the colours within any printed samples may vary when in full production mode. The printed inks colour fastness and colour variation may change over the course of time depending on where they are situated.
11. Where the product supplied by The Printed Film Co Ltd contains a printed substrate / interlayer, depending on the printed substrate / interlayer used, may be subject to some shrinkage during the lamination process, as such this is deemed acceptable up to 5mm from any edge of the laminated glass panel (measured from the inner edge / line of the arris / polished edge).
12. Where The Printed Film Co Ltd have supplied laminated glass sample(s) prior to supplying a job, based on those sample(s), there can be a slight variation from the sample to the job, in terms of the glass (even if the same spec as the sample) as the glass may be from a different production batch, this also applies to the EVA or PVB used as well as the printed substrate / interlayer, as inks, profiles, software, make and model of printer and weather / environmental conditions change, all of which can affect the appearance of the final product vs the initial sample(s).
13. The Printed Film Co Ltd take no responsibility for the fitting or fixing of laminated glass supplied by The Printed Film Co Ltd (unless otherwise separately agreed in writing). We are not responsible for the structural properties, performance or structural integrity of the laminated glass or the bonding / fitting / fixing methods used to install the glass.
The client shall indemnify The Printed Film Co Ltd against all loss, costs, damages, charges and expenses incurred as a direct result of the work infringing the rights of any third party. The Printed Film Co Ltd reserves the right to make any changes to the specification to conform to statutory requirements or codes of practice.
The client is not permitted, unless agreed in writing by The Printed Film Co Ltd, to divulge any technical information, specifications or processes to any other third party.
Any notice shall be in writing. Notice shall be deemed to have been given when posted using recorded delivery mail or if hand delivered, the point it is actually delivered.
These conditions shall be governed by English Law. All parties acknowledge and accept the non-exclusive jurisdiction of the English Courts. This Contract shall be subject to and construed and interpreted in accordance with English Law and shall be subject to the jurisdiction of the Courts of England.
The Printed Film Co Ltd
10 Grand Manor Drive
Company No. 07941485
Vat No. 129 1394 11
Certificate Number 10519